Asus M2N-VM SE - Manual (Page 70)

2-22 Chapter 2: BIOS setup
The following item becomes user-configurable when you set AI Tuning to [AI
Overclocking].
Overclock.Options.[Disabled]
Allows you to set the overclocking options.
Configuration options: [Disabled] [Overclock 3%] [Overclock 5%] [Overclock 8%]
[Overclock 10%]
The following items become user-configurable when you set AI Tuning to
[Manual].
CPU.Multiplier.[Auto]
Allows you to set the operating CPU multiplier. The configuration options may vary
depending on the type of CPU installed. Configuration options: [Auto] [5x] [5.5x]
[6x] ~ [13x]
CPU.Frequency.[Auto]
Displays the frequency sent by the clock generator to the system bus. The value of
this item is auto-detected by the BIOS. The values range from 200 to 300.
DDR2.Voltage.Control.[Auto]
Allows you to set the operating DDR2 voltage. Configuration options: [Auto] [1.8V]
[1.9V]
HT&Chip.Core.Voltage.[Auto]
Allows you to select the HT and chip core voltage.Configuration options: [Auto]
[+1.20V] [+1.30V]
SATA+1.8.Voltage.Control.[Auto]
Allows you to select the SATA voltage. Configuration options: [Auto] [1.800V]
[1.900V]