Asus M2N-VM SE - Manual (Page 35)

ASUS M2N-VM SE 1-23
2.. USB.device.wake-up.(3-pin.USBPW12,.USBPW34,.USBPW56,.USBPW78,.
USBPW910)
Set these jumpers to +5V to wake up the computer from S1 sleep mode
(CPU stopped, DRAM refreshed, system running in low power mode) using
the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep
modes.
The USBPW12 and USBPW34 jumpers are for the rear USB ports. The
USBPW56 is for the WiFi-AP module. The USBPW78 and USBPW910
jumpers are for the internal USB connectors that you can connect to
additional USB ports.
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system will not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
R
USBPW34
USBPW12
USBPW56
USBPW78
USBPW910
M2N-VM SE