Asus M2N-VM SE - Manual (Page 36)

1-24 Chapter 1: Product introduction
3.. Keyboard.power.(3-pin.KBPWR)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Space Bar). This feature requires an
ATX power supply that can supply at least 500 mA on the +5VSB lead, and a
corresponding setting in the BIOS.
R
M2N-VM SE
4.. PCIE.controller.setting.(3-pin.PCIE_SW)
This jumper allows you to enable the onboard DVI device or PCIE x 1 or
x4 device on your PCIEx16 slot. Set this jumper to pins 1-2 to enable the
onboard DVI, or to pins 2-3 to enable the PCIE x 1 and x 4 device on your
PCIEx16 slot.
R
M2N-VM SE