Asus M2N-VM SE User Manual

Page 44

1-32

Chapter 1: Product introduction

Never connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

9.. USB.connectors.(10-1.pin.USB56,.USB78,.USB910)

These connectors are for USB 2.0 ports. Connect the USB module cable

to any of these connectors, then install the module to a slot opening at the

back of the system chassis. These USB connectors comply with USB 2.0

specification that supports up to 480 Mbps connection speed.

10.. Optical.drive.audio.in.connector.(4-pin.CD)

These connectors allow you to receive stereo audio input from sound sources

such as a CD-ROM, TV tuner, or MPEG card.

The USB 2.0 module is purchased separately.

M2N-VM SE