Asus M4A79T Deluxe/U3S6 - Manual (Page 89)

ASUS M4A79T Deluxe 3-31
Chapter 3
Security Settings
Supervisor Password : Installed
User Password : Installed
Change Supervisor Password
User Access Level [Full Access]
Change User Password
Clear User Password
Password Check [Setup]
to change
password.
again to
disabled password.
BIOS SETUP UTILITY
Boot
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
[No Access]
Prevents user access to the Setup utility.
[View Only] Allows access but does not allow change to any field.
[Limited] Allows changes only to selected fields, such as Date and Time.
[Full Access] Allows viewing and changing all the fields in the Setup utility.
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.
Select the Change User Password item and press .
2. On the password box that appears, type a password composed of at least six letters
and/or numbers, then press .
3. Confirm the password when prompted.
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
[Setup] BIOS checks for user password when accessing the Setup utility.
[Always] BIOS checks for user password both when accessing Setup and booting
the system.