Chapter 2 – Asus M4A79T Deluxe/U3S6 User Manual
Page 54
2-34
Chapter 2: Hardware information
Chapter 2
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 600 W.
•
Do not forget to connect the 8-pin ATX +12 V power plug; otherwise, the system will
not boot.
•
Use of a PSU with a higher power output is recommended when configuring a system
with more power-consuming devices. The system may become unstable or may not
boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the
Recommended Power Supply Wattage Calculator at http://support.
asus.com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
•
The ATX 12 V Specification 2.0-compliant (1000W) PSU has been tested to support
the motherboard power requirements with the following configuration:
CPU: AMD Phenom 9950
Memory: 1024 MB DDR3 (x4)
Graphics card: PCI Express x16 Radeon 4870 X2 (x2)
Serial ATA device: SATA hard disk drive (x2)
Optical drive: DVD-RW (x1)
11. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are designed to fit
these connectors in only one orientation. Find the proper orientation and push down firmly until the
connectors completely fit.