Asus P5N-VM WS - Manual (Page 121)

ASUS P5N-VM WS 4-33
5. Select the RAID controller driver from the list, then press .
ENTER=Continue F3=Exit
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
NVIDIA RAID Driver (required)
NVIDIA nForce Storage Controller (required)
6. The Windows ® Setup loads the RAID controller drivers from the RAID driver
disk. When prompted, press to continue installation.
7. Setup then proceeds with the OS installation. Follow screen instructions to
continue.
Windows ® Vista OS
To install the RAID controller driver when installing Windows ® Vista OS
1. Insert the floppy disk with RAID driver into the floppy disk drive.
2. During the OS installation, select Load Driver, click Browse, then select
Floppy Disk Drive (A:). Click OK.
3. Select NVIDIA nForce RAID controller (A:\nvrd32.inf) and click Next.
4. Follow the succeeding screen instructions to complete the installation.