Chapter 1, Chapter 1: product introduction, H87m-plus digital audio connector – Asus H87M-PLUS User Manual
Page 32: H87m-plus usb2.0 connectors
![background image](/manuals/297088/32/background.png)
1-18
Chapter 1: Product introduction
Chapter 1
6.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
The S/PDIF module is purchased separately.
H87M-PLUS
H87M-PLUS
Digital audio connector
SPDIF_OUT
+5V
SPDIFOUT GND
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
•
The USB 2.0 module is purchased separately.
•
These connectors are based on xHCI specification. We recommend you to install
the related driver to fully use the USB 2.0 ports under Windows
®
7 or later operating
systems.
5.
USB 2.0 connectors (10-1 pin USB910; USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480Mbps connection speed.
H87M-PLUS
H87M-PLUS USB2.0 connectors
USB+5V
USB_P13-
USB_P13+
GND
NC
USB+5V
USB_P14-
USB_P14+
GND
USB1314
PIN 1
USB+5V
USB_P9-
USB_P9+
GND
NC
USB+5V
USB_P10-
USB_P10+
GND
USB910
PIN 1
USB+5V
USB_P11-
USB_P11+
GND
NC
USB+5V
USB_P12-
USB_P12+
GND
USB1112
PIN 1