Chapter 3 – Asus H87M-PLUS User Manual
Page 80
3-28
Chapter 3: BIOS setup
Chapter 3
iGPU Memory [Auto]
Allows you to set the system memory size allocated to DVMT 5.0 used by the iGPU.
Configuration options: [Auto] [32M] [64M] [96M] [128M] ~ [448M] [480M] [512M]
[1024M]
Render Standby [Auto]
Allows you to enable or disable Intel
®
Graphics Render Standby support to reduce
iGPU power use when the system is idle. Configuration options: [Auto] [Disabled]
[Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable the iGPU Multi-Monitor. For LucidLogix Virtu MVP function
support, set this item to [Enabled] to empower both integrated and discrete graphics.
The iGPU shared system memory size will be fixed at 64MB.
Configuration options: [Disabled] [Enabled]
DMI Configuration
Allows you to control various DMI (Desktop Management Interface) functions.
DMI Gen 2 [Auto]
Allows you to enable or disable DMI Gen 2. Configuration options: [Auto] [Enabled]
[Disabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEx16_1 Link Speed [Auto]
Allows you to configure the PCIEx16 speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
DMI Link ASPM Control [Disabled]
Allows you to enable or disable the control of Active State Power Management on SA
side of the DMI Link. Configuration options: [Disabled] [L0s] [L1] [L0sL1]
PEG - ASPM [Disabled]
Allows you to control ASPM support for the PEG device. Configuration options:
[Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
Memory Configuration
Allows you to configure the memory configuration parameters.
Memory Scrambler [Enabled]
Allows you to enable or disable the Memory Scrambler support. Configuration options:
[Enabled] [Disabled]
Memory Remap [Enabled]
Allows you to enable remapping the memory above 4GB. Configuration options:
[Enabled] [Disabled]