Asus H87M-PLUS - Manual (Page 63)

ASUS H87M-PLUS 3-11
Chapter 3
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the
BCLK Frequency: DRAM Frequency Ratio item settings.
CPU Graphics Max. Ratio [Auto]
[Auto] The CPU Graphics Max. Ratio is set to its optimized setting depending on
the system loading.
[Manual] Use the <+> or <-> keys to adjust the optimal CPU Graphics Max. Ratio.
The frequency may vary depending on the system load.
GPU Boost [As is]
GPU Boost accelerates the integrated GPU for extreme graphics performance. Configuration
options: [As is] [Enabled]
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function. Configuration options:
[Disabled] [Enabled]
DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1] – [63]
DRAM COMMAND Rate [Auto]
Configuration options: [Auto] [1] – [3]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1] – [15]