Asus H87M-PLUS - Manual (Page 71)

ASUS H87M-PLUS 3-19
Chapter 3
CPU Cache Voltage Offset
Allows you to set the CPU cache voltage offset. Use the <+> or <-> keys to adjust the
value. The values range from 0.001V to 0.999V with a 0.001V interval.
The following item appears only when you set the CPU Cache Voltage to [Adaptive Mode].
Additional Turbo Mode CPU Cache Voltage [Auto]
Allows you to add voltage for Turbo Mode CPU Graphics. Use the <+> or <-> keys to
adjust the value. The values range from 0.001V to 1.920V with a 0.001V interval.
CPU System Agent Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU System Agent Voltage Offset [Auto]
Allows you to configure the amount of voltage fed to the system agent of the processor
including its PCIe controller and power control unit. Increase the amount of voltage
when increasing DRAM frequency. Use the <+> or <-> keys to adjust the value. The
values range from 0.001V to 0.999V with a 0.001V interval.
CPU Analog I/O Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Analog I/O Voltage Offset [Auto]
Allows you to configure the amount of voltage fed to the analog portion of the I/O on
the processor. Increase the amount of voltage when increasing DRAM frequency. Use
the <+> or <-> keys to adjust the value. The values range from 0.001V to 0.999V with
a 0.001V interval.
CPU Digital I/O Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Digital I/O Voltage Offset [Auto]
Allows you to configure the amount of voltage fed to the digital portion of the I/O on the
processor. Increase the amount of voltage when increasing DRAM frequency. Use the
<+> or <-> keys to adjust the value. The values range from 0.001V to 0.999V with a
0.001V interval.
SVID Support [Auto]
Disabling SVID support stops the processor from communicating with the external voltage
regulator. Configuration options: [Auto] [Disabled] [Enabled]
• We recommend that you disable this function when overclocking.
• The following item appears only when you set SVID Support to [Enabled].