Asus ESC1000 Personal SuperComputer - Manual (Page 95)

ASUS ESC1000 4-31
4.6.5 Hardware Monitor
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select [Ignored] if you do not wish to display the detected
temperatures.
CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows [N/A].
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU Q-fan control feature.
Configuration options: [Disabled] [Enabled]
The following item appears only when you enable the CPU Q-Fan Control item.
CPU Fan Profile [Standard]
Allows you to set the appropriate performance level of the ASUS Q-Fan.
When set to [Standard], the CPU fan automatically adjusts depending on
the CPU temperature. Set this item to [Silent] to minimize fan speed for
quiet CPU fan operation, or [Turbo] to achieve maximum CPU fan speed.
Configuration options: [Standard] [Silent] [Turbo]
Chassis Fan 1/2/3 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the chassis
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows [N/A].
Hardware Monitor
CPU Temperature [35ºC/95ºF]
MB Temperature [34ºC/93ºF]
CPU Fan Speed [1721RPM]
CPU Q-Fan Control [Disabled]
Chassis Fan 1 Speed [N/A]
Chassis Fan 2 Speed [N/A]
Chassis Fan 3 Speed [N/A]
Chassis Q-Fan Control [Disabled]
Power Fan Speed [N/A]
CPU Voltage [ 0.832V]
3.3V Voltage [ 3.400V]
5V Voltage [ 5.094V]
12V Voltage [12.137V]
BIOS SETUP UTILITY
Power
CPU Temperature