Asus ESC1000 Personal SuperComputer - Manual (Page 41)

2-21 ASUS ESC1000
2.8 Cable connections
2.8.1 Motherboard connections
• The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
• Refer to Chapter 3 for detailed information on the connectors.
Standard cables connected to the motherboard
1. 24-pin ATX power connector (from power supply to motherboard)
2. 8-pin 12V power connector (from power supply to motherboard)
3. System fan connector (from system fan to motherboard)
4. Front panel USB connector (from motherboard to front I/O board)
5. SATA conectors (from motherboard to SATA backplane)
6. Chassis Intrusion connector (from rear chassis intrusion switch to
motherboard)
7. System panel connector (from motherboard to front I/O board)
8. Front panel audio connector (from motherboard to front I/O board)
3
5
1
2
3
3
4 6 7 8