Asus ESC1000 Personal SuperComputer - Manual (Page 116)

5-10 Chapter 5: RAID configuration
Creating a RAID 0 or RAID 1 set
To create a RAID set:
1. From the utility menu bar, select RAID > Create array.
2. Press . The screen shows the disks you can add to make up the
RAID set. Use the arrow key to select a disk and press or
to include this disk in the array.
3. After you have selected the desired disks, select NEXT to create array.
Marvell BIOS Setup (c) 2008 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection] [Controller] [ Devices ] [ RAID ]
RAID Config
Select free disks to create
ID Port Disk Name Size Max Speed Status
0 0 SAS : ST336754SS 36.6GB SAS 3.0 FREE
1 1 SAS : ST336754SS 36.6GB SAS 3.0 FREE
NEXT
Marvell BIOS Setup (c) 2008 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection] [Controller] [ Devices ] [ RAID ]
RAID Config
Create array
Delete array
Wipe out disk
Spare Management