Asus P5QL-E - Manual (Page 94)

ASUS P5QL-E 4-29
4.5.5 PCIPnP
The PCIPnP menu items allow you to change the advanced settings for PCI/PnP
devices.
Take caution when changing the settings of the PCIPnP menu items. Incorrect
field values can cause the system to malfunction.
Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Legacy USB Support [Auto]
Allows you to enable or disable the support for legacy USB devices. Setting to [Auto]
allows the system to detect the presence of USB devices at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]
USB Mass Storage Device Configuration
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S [No]
NO: lets the BIOS
configure all the
devices in the system.
YES: lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
BIOS SETUP UTILITY
Advanced
USB Mass Storage Device Configuration
USB Mass Storage Reset Delay [20 Sec]
Device #1 Kingston DataTraveler
Emulation Type [Auto]
BIOS SETUP UTILITY
Advanced
USB Mass Storage Reset Delay [20 Sec]
Configuration options: [10 Sec] [20 Sec] [30Sec] [40 Sec]
Emulation Type [Auto]
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM]