Asus P5QL-E - Manual (Page 90)

ASUS P5QL-E 4-25
Ratio CMOS Setting: [Auto]
Allows you to set the ratio between the CPU Core Clock and the FSB Frequency.
Use <+> and <-> to adjust the value. Configuration options: [Auto] [12] [13] [14]
[15] [16] [17] [18]
The options vary depending on the CPU you install.
C1E Support [Enabled]
Allows you to enable or disable Enhanced Halt State support.
Configuration options: [Disabled] [Enabled]
Max CPUID Value Limit [Disabled]
Setting this item to [Enabled] allows legacy operating systems to boot even without
support for CPUs with extended CPUID functions.
Configuration options: [Disabled] [Enabled]
Intel(R) Virtualization Tech [Enabled]
The Intel® Virtualization Technology allows a hardware platform to run multiple
operation systems separately and simultaneously, enabling one system to virtually
function as several system.Configuration options: [Disabled] [Enabled]
A full reset is required to apply the setting.
CPU TM function [Enabled]
This function enables the overheated CPU to throttle the clock speed to cool down.
Configuration options: [Disabled] [Enabled]
Execute Disable Bit Capability [Enabled]
Allows you to enable or disable the No-Execution Page Protection Technology.
Setting this item to [Disabled] forces the XD feature flag to always return to zero
(0). Configuration options: [Disabled] [Enabled]
The following item appears only when you set the CPU Ratio control item to
[Auto].
Intel(R) SpeedStep (TM) Tech [Enabled]
When set to [Disable], the CPU runs at its default speed. When set to [Enabled],
the CPU speed is controlled by the operating system. Configuration options:
[Disabled] [Enabled]