Asus P5Q-E/WiFi-AP - Manual (Page 92)

3-26 Chapter 3: BIOS setup
Update To Super Speed [Press Enter]
This item appears only when you set the Drive Xpert Mode Update item
to [Mode change] and allows you to use Super Speed function. Plug two
identical SATA hard drives in the orange SATA port labeled SATA_E1
(port 0) and the white SATA port labeled SATA_E2 (port 1) and press the
key.
Update To EZ Backup [Press Enter]
This item appears only when you set the Drive Xpert Mode Update item to
[Mode change] and allows you to use EZ Backup function. Plug two identical
SATA hard drives in the orange SATA port labeled SATA_E1 (port 0) and the
white SATA port labeled SATA_E2 (port 1) and press the key.
• Make necessary backup before using the Drive Xpert function:
All original data of the SATA_E2 (white, port1) hard drive will be erased for
EZ Backup setup.
All original data of the two hard drives will be erased for Super Speed
setup.
• Refer to 4.3.11 ASUS Drive Xpert for detailed application instructions.
Update To Normal mode [Press Enter]
This item appears only when you set the Drive Xpert Mode Update item to
[Mode change] and uses the orange SATA port labeled SATA_E1 (port 0)
and the white SATA port labeled SATA_E2 (port 1) as normal SATA ports.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]