Asus P5Q-E/WiFi-AP - Manual (Page 156)

4-46 Chapter 4: Software support
Using Drive Xpert funcition in Express Gate environment
You may use Drive Xpert function in Express Gate environment by preparing only
two hard drives.
In Express Gate environment
For Express Gate environment, you need to use another computer to install
Express Gate on a USB flash disk drive in advance.
Follow below instructions to complete installation:
1. Plug a USB flash disk drive in a computer with OS already installed.
2. Refer to the Express Gate
installation on page 4-50. Ensure
to select USB as the target disk
volume when the Choose target
volume screen appears.
3. Plug the USB flash disk drive to the
motherboard. Restart the system,
and launch the Express Gate.
Launching Drive Xpert
Open the ASUS Utility panel by clicking
. Launch Drive Xpert from the
ASUS Utility panel. The main screen as shown below appears. Select EZ
Backup or Super Speed according to your need.
Make necessary backup before using the Drive Xpert function:
• All original data of the hard drive connected to the SATA_E2 (white, port 1)
connector on the motherboard will be erased for EZ Backup setup
• All original data of the two hard drives will be erased for Super Speed setup.