Asus Blitz Extreme - Manual (Page 97)

ASUS Blitz Extreme 4-23
4.5.2 USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press to display the configuration options.
The USB Devices Enabled item shows the auto-detected values. If no USB
device is detected, the item shows None.
USB Functions [Enabled]
Allows you to enable or disable the USB functions. The following sub-items appear
when this item is set to [Enabled]. Configuration options: [Disabled] [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
USB Configuration
USB Devices Enabled:
None
USB Functions [Enabled]
USB 2.0 Controller [Enabled]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-off [Enabled]
Port 64/60 Emulation [Disabled]
Legacy USB Support [Auto]
Options
Disabled
Enabled
BIOS SETUP UTILITY
Advanced
4.5.1 Ai Net 2
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
POST Check LAN cable [Disabled]
Ai Net 2
Pair Status Length
1-2 N/A
3-6 N/A
4-5 N/A
7-8 N/A
1-2 N/A
3-6 N/A
4-5 N/A
7-8 N/A
Check LAN cable during
POST.
BIOS SETUP UTILITY
Advanced
POST Check LAN cable [Disabled]
Enables or disables the LAN cable checking during the POST.
Configuration options: [Disabled] [Enabled]