Optional fan on the other side fins – Asus Blitz Extreme User Manual

Page 66

2-40

Chapter 2: Hardware information

1. Assemble the optional fan kit

by fitting the optional fan to the

grooved edge of the plastic fan

seat and snapping it into place.

2. The photo below demostrates the

the optional fan ready for use.

3. Slide the optional fan onto the

heatsink, then connect the fan

cable.

4. The photo shows the fan installed

on the motherboard.

• Plug the optional fan cables to the CHA_FAN1, CHA_FAN4 or PWR_FAN

connector on the motherboard.

• Make sure the optional fan is installed correctly to prevent damage to the

fan and motherboard components.

When you are using water-cooling modules, make sure to install TWO optional

fans to obtain a more effective heat dissipation.

Optional fan on the other side fins