Canon PowerShot S30 - Manual (Page 125)

Printing with Bubble Jet Printer (Optional) 123
Printing
An image can be printed when displayed in single replay or selected in index replay.
1
Choose an image using B or A on the multicontroller and
press
.
2
Set the number of prints, the print style and cropping settings
as required.
• Selecting the number of copies (p. 124)
• Setting the Print Style (p. 124)
• Trimming (Printing a Portion of an image) (p. 126)
3
Choose [Print] using B or A on the
multicontroller and press
.
• You can also select [Print] by pressing the
button.
• The image starts printing and, when it is
completely finished, the display reverts to
standard replay mode.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• You cannot print movies or images recorded in the RAW format.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Cancel Printing
• To cancel printing between images, press . A confirmation dialog appears.
Select [OK] using B or A on the multicontroller and press .
The printing stops even if it is incomplete and the paper is fed through.
• A print in progress cannot be stopped. Wait until the current image is printed and
then cancel before the next one starts. The display reverts to standard replay
mode.
Printing Errors
• An error message will appear if an error occurs for some reason during the
printing process (p. 150). The printing resumes automatically after you correct the
error. If the error persists, press
and stop printing.
• The [Continue] and [Stop] options may appear with some error messages.
• The error number is displayed on the operation panel of Bubble Jet Printer. Please
refer to the Bubble Jet Printer Quick Start Guide for the remedies corresponding to
the error numbers.