Canon PowerShot S30 - Manual (Page 100)

98 Replaying
Attaching Sound Annotations to Images
In replay mode (including single replay, index replay, magnifying replay and the replay
immediately after shooting in Shooting mode) you can attach sound annotations (up to
60 seconds) to an image. The sound data is saved in WAVE format.
1
Press the button while replaying images.
• The A / V panel appears.
2
Select using B or A on the
multicontroller, then press .
• The recording starts and the elapsed time is displayed.
Speak towards the microphone of the camera.
• To stop recording, press . To restart recording,
press again.
• You can add as many sound annotations as you
like until their total time reaches 60 seconds.
Playing back the Sound Annotations
Select in step 2 above. Images with sound annotations are displayed with the
mark. To start playback, press . To stop playback, press again. You can
adjust the volume using C or D on the multicontroller.
Erasing the Sound Annotations
Select in step 2 above.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• You cannot attach sound annotation to movies.
• If there is no space for recording on the CF card, the message “CF card full”
appears and you cannot continue recording.
• You cannot attach sound annotations to an image if it already has any
incompatible sound file. Such an image displayed with the mark and the
message “Unidentified sound file” appears.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• The volume can be adjusted in the Play menu (p. 137).