Q-Tech QT802 Square Wave - Manual (Page 9)

QT801 and QT802 Square-Wave
24 pin DDIP
REV.
Q-TECH Corporation
10150 W. Jefferson Blvd.
Culver City, CA 90232
SIZE
A
CAGE NO.
51774
Sheet 9 of 10 D
3.8 Engineering Models
Engineering Models are fit, form, and function representative of Flight Models and of commercial
construction using commercial parts of same generic type as Flight Models. Completed oscillators are
not screened.
NOTES:
This oscillator is offered to meet the specifications above and is not guaranteed to meet any
other requirements.
▀
PART NUMBER GENERATION
SERIES
Output type
and supply
voltage
SYMMETRY
TEMPERATURE
RANGE (°C)
Stability
Over
Temperature
External
Tuning
Level
FREQUENCY
(MHz)
1: HCMOS, 5.0V A:40%…60% N: 0…+50……… ±1 ppm
X: No tuning (± 1
ppm accuracy at
25°C)
E: Eng. Model
3.000…90.000
(See note 1)
2: HCMOS, 3.3V T:(See note 2) P: 0…+70………… ±1 ppm R: External resistor M: Flight Model
Q: 0…+70……… ±2 ppm V: External voltage
R: 0…+70……… ±5 ppm
U: -20…+70…… ±1 ppm
V: -20…+70……
±2 ppm
W:-20…+70……
±5 ppm
X: -40…+85…… ±4 ppm
Y: -40…+85…… ±5 ppm
Z: -40…+85…… ±10 ppm
A: 0…..+50…… ± 0.5ppm
G: 0….+70……
± 0.5ppm
H:-30…+70……
±2 ppm
K:-30…+70……
±4 ppm
QT80:
24 Pin
DDIP
(See note 1 below)
1. Variations from standard specification are available, please contact factory.
2. 45/55 Symmetry Contact factory for options available.
EXAMPLE:
QT802AURM-50.000000 would be a Flight Model version HF TCXO, 24 pin DDIP, HCMOS 3.3 volts, 40/60 symmetry,
stability ±1 ppm over -20…+70°C, @ 50 MHz with external tuning via external resistor
QT802AURE-50.000000 would be an Engineering Model version HF TCXO, 24 pin DDIP, HCMOS 3.3 volts, 40/60
symmetry, stability ±1 ppm over -20…+70°C, @ 50 MHz with external tuning via external resistor
ITAR-CONTROLLED Q-TECH PROPRIETARY DO NOT COPY OR DISTRIBUTE WITHOUT Q-TECH APPROVAL