Q-Tech QT88RD - Manual

AMSC N/A FSC 5955
INCH-POUND
MIL-PRF-55310/36B
1 February 2013
SUPERSEDING
MIL-PRF-55310/36A
19 April 2010
PERFORMANCE SPECIFICATION SHEET
OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO),
1 MHz THROUGH 100 MHz, HERMETIC SEAL, LOW VOLTAGE 1.8V CMOS
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and
MIL-PRF-55310 .
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.005 (0.13 mm) for three place decimals and ±.02 (0.5 mm) for
two place decimals.
FIGURE 1. Interface and physical dimensions.
Pin number Function
1 Enable/Disable
2 GND
3 Output
4 B+
Ltr
Inches Millimeters
Min Max Min Max
A .345 Typ .355 Typ 8.80 Typ 9.02 Typ
B .285 Typ .295 Typ 7.24 Typ 7.49 Typ
C .086 .114 2.18 2.90
D .195 .205 4.95 5.20
E .025 .040 .635 1.02
F --- .320 --- 8.13
G .232 .248 5.89 6.30
H --- .170 --- 4.32
J .015 .021 0.39 0.53