Q-Tech CLASS B+ - Manual

Features
• Made in the USA
• ECCN: EAR99
• DFARS 252-225-7014 Compliant:
Electronic Component Exemption
• Broad frequency range from 15kHz to 350MHz
• Rugged 4-point mount (SMD ceramic) or 3 point mount
(Others) shock resistant
• HCMOS, LVCMOS, TTL, LVDS logic
• Tristate Output option (-D)
• Hermetically sealed package
• Fundamental and 3rd Overtone design
• Swept Quartz Crystal or Cultured Quartz Crystal
• Low phase noise and jitter
• Q-Tech does not use pure lead or pure tin in its products
• Custom screening and QCI available with MCM part number
• MIL-PRF-55310/9, /16, /21, /26, /27, /28, /30, /33, /34, ,/35,
/37, /38, /39 equivalent
• RoHs compliant
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com
1 of 27 QPDS-0001, Rev L, June 2013 (ECO #10851)
CLASS B+ PRODUCTS
HIGH RELIABILITY HYBRID CRYSTAL CLOCK OSCILLATORS
2.5 to 5.0Vdc - 15kHz to 350MHz
Q-TECH
CORPORATION
Ordering Information
For Non-Standard requirements, contact Q-Tech Corporation at [email protected]
Output Frequency
Frequency vs. Temperature Code(***):
2 = ± 65ppm at -55ºC to +125ºC
6 = ± 50ppm at -55ºC to +105ºC
7 = ± 75ppm at -55ºC to +125ºC
9 = ± 50ppm at -55ºC to +125ºC
10 = ±100ppm at -55ºC to +125ºC
11 = ± 50ppm at -40ºC to +85ºC
12 = ±100ppm at -40ºC to +85ºC
Logic & Supply Voltage:
(All B+ Packages)
HC = HCMOS 5.0V
L = HCMOS 3.3V
T = TTL 5.0V
N = LVCMOS 2.5V
(QT22, QT28, QT25, QT27 & QT93 Only)
LW = LVDS 3.3V
NW = LVDS 2.5V
Tristate Option:
(Standard offering in LW & NW)
Blank = No Tristate
D = Tristate
Package:
See Pages 5, 20, 21, 22
Screening Option:
S = Per MIL-PRF-38534, Class K (modified)
A = Per MIL-PRF-55310, Level S (modified)
B = Per MIL-PRF-55310, Level B (modified)
E = Engineering Model
Q T 1 88 HC D 10 S - 100.000MHz
(Sample part number)
Materials Level
1 = Rad Tolerant Die, Swept Quartz Crystal
2 = Rad Tolerant Die, Cultured Quartz Crystal
3 = Class B Die, Swept Quartz Crystal
Lead Finish:
T = Standard (*)
S = Solder Dip (**)
(*) Gold Plated: 50μ ~ 80μ inches typ.
(**) Hot Solder Dip Sn60/Pb40 per MIL-PRF 55310 is optional for an additional cost
(***) Frequency stability vs. temperature codes may not be available in all frequencies
QT188HCD10S-100.000MHz