Q-Tech QT806 Sine Wave - Manual

DETAIL PRODUCT
SPECIFICATION CONTROL DRAWING
Revision Record
Revision DCO Description
Eng. Approval
Initials and Date
QA Approval
Initials and Date
Release
Date
– Initial release 5/28/08
A Updated part numbers LV RS CA 1/9/09
B Edited part numbers LV RS CA 6/21/09
C Edited Environmental Conditions, added temperature range options. LV RS CA 12/2/10
D
Changed par. 3.1.1 split supply and load variation from frequency
stability vs. temperature characteristics; changed phase noise note;
split current for lower supply voltage. (ECO 10551)
LV BR CA 7/24/12
E 2223
Section 3.1.1 Electrical Characteristics:
Parameter: Freq. stability vs. ±5 % Input Voltage Variation, Max;
Value: WAS: ±1.2 for Vss= 5 and 3.3V ±0.3 for Vss= 5 and 3.3V
IS: ±1.2 for Vss= 5 and 3.3V ±0.3 for Vss= 12
LV JL 10/2/13 CP 10/2/13 10/2/13
UNLESS OTHERWISE SPECIFIED THE INFORMATION CONTAINED IN THIS SPECIFICATION CONTROL DRAWING IS THE SOLE PROPERTY OF Q­
TECH CORPORATION. ANY REPRODUCTION OR DISTRIBUTION OF THIS PROPRIETARY DOCUMENT IN PART OR
AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Q­TECH CORPORATION IS PROHIBITED.
INFORMATION INCLUDED HEREIN IS CONTROLLED UNDER THE INTERNATIONAL TRAFFIC IN ARMS
REGULATIONS (ITAR) BY THE U.S. DEPARTMENT OF STATE. TRANSFER OF THIS INFORMATION TO A FOREIGN
PERSON OR FOREIGN ENTITY REQUIRES AN EXPORT LICENSE ISSUED BY THE U.S. STATE DEPARTMENT OR AN
ITAR EXEMPTION TO THE LICENSE REQUIREMENT PRIOR TO THE EXPORT OR TRANSFER.
Dimensions are in Inches
Tolerances
Decimal Fraction Angular
.xxx ± .005
.xx ± .02 x° ± 2°
.x ± .1
Initial Release
Prepared Date
Luis Vargas 5/28/08
Checked Date
Craig Albright 2/10/09
Engineering Approval Date
Ron Stephens 2/10/09
Quality Assurance Approval Date
Craig Albright 2/10/09
Released Date
Alfred Min 2/10/09
F1195-2RA
10150 West Jefferson Blvd.
Culver City, CA 90232-3510 USA
LOW PROFILE 24 PIN DDIP HYBRID
CRYSTAL OSCILLATOR, TCXO, CLASS S,
STANDARD DESIGN FOR SINE WAVE
UP TO 150MHz
DRAWING NO. REVISION
QT804, QT805 and QT806
Sine-Wave 24 DDIP
E
SCALE SIZE CAGE CODE PAGE
NONE A 51774 1 of 10