Q-Tech QT812 Square Wave - Manual

CONSULT FACTORY FOR CURRENT REVISION
REVISIONS
REVISION DESCRIPTION APPROVED DATE
A Updated part numbers Luis Vargas 1/9/09
B Edited Part Numbers Luis Vargas 6/21/2009
C Edited Luis Vargas 12/2/2010
D
Changed par. 3.1.1 split supply and load variation from frequency
stability Vs. temperature characteristics, phase noise limits @10Hz
and 100 Hz) Add par. 3.4.2 Logic microcircuits and Radiation
(ECO#
10550)
C. Albright 4/26/12
SPECIFICATION CONTROL DRAWING
Q-TECH CORPORATION
10150 W. JEFFERSON BLVD.
CULVER CITY, CA 90232-3510
UNLESS OTHERWISE
SPECIFIED, DIMENSIONS
ARE IN INCHES.
TOLERANCES:
3 PLACE DECIMAL = .005
2 PLACE DECIMAL = .02
1 PLACE DECIMAL = .1
FRACTIONS = ± 1/16
ANGLES = 2 DEGREES
PREPARED BY:
Luis Vargas
DATE
4/25/12
LOW PROFILE 24 PIN Flat-Pack HYBRID CRYSTAL
OSCILLATOR, TCXO, CLASS S,
Standard Design For HCMOS up to 90MHz CHECKED BY:
B. Remtulla
DATE
4/26/12
DRAWING NO.:
QT811 and QT812
Square-Wave
REVISION
D
RELEASED BY:
P. Steinblums 4/26/12
APPROVED BY:
C. Albright
DATE
4/26/12
SCALE
NONE
SIZE
A
CAGE CODE
51774
SHEET 1 of 10
ITAR-CONTROLLED Q-TECH PROPRIETARY DO NOT COPY OR DISTRIBUTE WITHOUT Q-TECH APPROVAL