Q-Tech QT84 - Manual

1 of 6
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: 310-836-7900 - Fax: 310-836-2157 - www.q-tech.com
LOW PROFILE QT84
MINIATURE SMD CRYSTAL OSCILLATORS
1.8 to 5.0Vdc - 500kHz to 160MHz
Q-TECH
CORPORATION
QPDS-0003, Rev G, February 2013 (ECO# 10720)
Description
Q-Tech’s surface mount 7 x 5 mm oscillator series consist
of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square wave
generator and a miniature strip AT quartz crystal built in a
low profile ceramic package with gold plated contact pads.
This is the smallest package Q-Tech has ever offered for
High Reliability applications.
Applications
• Designed to meet today’s requirements for low
voltage applications
• High shock applications
• Gun launched munitions and systems
• Smart munitions
• Instrumentation
• Navigation
• Avionics
• Microprocessor clock
Ordering Information
Specifications subject to change without prior notice.
Features
• Made in the USA
• ECCN: EAR99
• Broad frequency range from 500kHz to 160MHz
• Small footprint
• LVHCMOS, HCMOS, and TTL compatible
• 5.0Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc supply
• Able to meet 36000G shock, half sine, 0.5ms
• Wide operating temperature range
• Tri-State Output (Option D)
• Hermetically sealed ceramic package
• Fundamental and 3rd Overtone designs
• Full or partial military screening tests available
• Tape and reel packaging
• Lead free tinning available
• RoHS compliant
Available for temperatures up to +200ºC with Q-Tech MCM number.
Output Frequency
Frequency vs. Temperature Code:
7 = ± 75ppm at -55ºC to +125ºC
10 = ± 100ppm at -55ºC to +125ºC
11 = ± 50ppm at -40ºC to +85ºC
17 = ± 75ppm at -60ºC to +125ºC
18 = ± 100ppm at -60ºC to +125ºC
See notes (**)
Screening Option:
Blank=No Screening
M=Per MIL-PRF-55310, Level B
Logic & Supply Voltage:
HC = HCMOS +5.0V
L = LVHCMOS +3.3V
N = LVHCMOS +2.5V
R = LVHCMOS +1.8V
See notes (**)
Tristate Option:
Blank = No Tristate
D = Tristate
Package
Q T 84 HC D 10 M - 50.000MHz
(Sample part number)
QT84HCD10M-50.000MHz
Solder Dip Option:
T = Standard
S =Solder Dip (*)
G =Solder Dip (*)
(*) Hot Solder Dip options for an additional cost:
S = Sn60/Pb40 per MIL-PRF 55310
G = Lead free Alloy SAC305 (96.5% Sn, 3% Ag, 0.5% Cu)
• Supply voltage, frequency stability vs. temperature codes
may not be available in all frequencies.
• For Non-Standard requirements, contact Q-Tech Corporation
at [email protected]
(**)Notes