SCANTECH ID (Champtek company) ORION O-3050 - Manual (Page 28)

Installing the ORION O-3050 20
2. Place the bottom plate on the counter and mark the places for the mounting
holes on the counter top and mark the hole to lead the cables through.
3. Drill the mounting holes and the lead-through hole.
NOTE
If you prefer not to drill in your counter, you can mount the stand
using the provided double-sided tape and have the cables leave the
foot at the rear, just above the circular basis.
4. Fix the bottom plate on the counter top using the screws or tape from the
mounting kit.
5. Lead the cables from the bottom upwards through the hole in the counter,
through the bottom plate and through the scanner stand.