SCANTECH ID (Champtek company) ORION O-3050 User Manual
Page 26
Installing the ORION O-3050
18
3. Plug the remote ends of all cables into the appropriate connections of your
host POS-system.
4. If you are using an external power supply, power on the scanner by plugging
the power supply into an AC power outlet. Switch on the host system.
IMPORTANT
To activate USB or KBW interface, scan the following codes
from the Configuration Guide:
1. Open the scanner Programming Mode by scanning code 1.1.
2. Return to factory default settings by scanning code 1.3.
Once the scanner is installed, you can start scanning bar code labels. If you
want to change the default settings of the scanner, proceed to the Configuration
Guide which came with the scanner.