Pro Series 7168 15K FIFTH WHEEL - Manual (Page 23)

TOYOTA TUNDRA 2000 & NEWER (STANDARD CAB LONG BOX ONLY)
CAUTION!
Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
NOTE: For Toyota Tundra application, part #58197 spacer kit is required. Stack (1) 3/16” and (1) 5/16” thick
slotted spacer to avoid crushing of truck bed.
32 1/2” Long Box (Only)
Side Bracket
Axle Center
Front
of
Vehicle
Rear Edge of
Truck Bed
1/4 1.5-3
1/4 2
*
1/4 2
1/4 2
*
* Optional weld
pattern
Drivers side shown
Measure from Rear Edge of truck
bed to rear edge of base rail.
Long bracket Short bracket
ROW 1 ROW 2 ROW 3 ROW 4
King Pin Centered approx.. 1 1/4”
forward of Axle Center
Each base rail must have a
bolt in either of the marked
center holes. Check for
obstructions before drilling.
CAUTION!
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
Cequent Towing Products does its best to communicate tow vehicle manufacturer changes; however, it is ultimately the
responsibility of the installer to prevent damage due to installation.
30056IN – 21DEC05I PCN8397 ©2006 Cequent Towing Products Litho in USA 23