Pro Series 7168 15K FIFTH WHEEL - Manual (Page 13)

CHEVROLET/GMC 88-98 / 92-98 4-DOOR / ‘99 SILVERADO
SIERRA CLASSIC (WITH TAPERED FRAME) (RED TURN SIGNALS)
CAUTION!
Read pages 2-3 of these instructions before starting installation. Failure to do so could result in significant vehicle damage!
IMPORTANT NOTES FOR THIS INSTALLATION:
1. Find parallel rows of bed sill spot welds in bed of truck. No drilling should be done in the ~4” between parallel rows of
spot welds where the bed sill sits.
Side Bracket
Axle Center
Front of
Vehicle
Rear Edge of
Truck Bed
1/4 1.5-3
1/4 2
*
1/4 2
1/4 2
*
*
Optional weld
pattern
Drivers side 1/2 ton Long Box shown
King Pin Center approx.. 1 1/2”
forward of Axle Center
Measure from Rear Edge
of truck bed to rear edge
of base rail.
Long bracket
30 15/16” Long Box
26 3/16” Short Box
Short bracket
ROW 1 ROW 2 ROW 3 ROW 4
Bed Sill
Each base rail must have a
bolt in either of the marked
center holes. Check for
obstructions before drilling.
CAUTION!
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
Cequent Towing Products does its best to communicate tow vehicle manufacturer changes; however, it is ultimately the
responsibility of the installer to prevent damage due to installation.
30056IN – 21DEC05I PCN8397 ©2006 Cequent Towing Products Litho in USA 13