Pro Series 63134 BIKE CARRIERS User Manual
Item description, Q-slot 2 bike rack, Assembly instructions
![background image](/manuals/293204/1/background.png)
:
:
63134
Q-Slot 2 Bike Rack
Assembly Instructions:
1.
Align mounting holes of Receiver Shank with holes in Main Support Assembly. Use the supplied 3/8”
carriage bolts and 3/8” Nylon locking nuts to fasten receiver shank to main support. (Fig 1)
2.
Rotate side tubes to the horizontal position as illustrated. Lock side tubes in position with bail pins in
lower position as illustrated. (Fig 2)
3.
Slide Wheel Cradle assemblies on side tubes as illustrated. (Fig 3)
4.
Slide Frame Hook assemblies on center tube as illustrated. (Fig 3)
Kit Contents:
Main Support Arm Assembly
1
Receiver Adapter
1
LH Wheel Cradle Assembly
2
3/8-16 x 2” Carriage Bolt
2
RH Wheel Cradle Assembly
2
3/8-16 Lock Nut
2
Frame Hook Assembly – Long 1
1/2” Anti-Rattle Pin
1
Frame Hook Assembly – Short 1
Flat Washer ½
1
Receiver Shank
1
Pin Clip
1
ITEM
DESCRIPTION
Main Support Assembly
3/8” Carriage Bolt
Main Support Assembly
TOOLS REQUIRED:
9/16 Wrench
¾ Wrench
Cequent Performance Products
Plymouth, MI 48170
Technical Service: (888) 521-0510
Page 1 of 12
FIGURE 1
3/8” Nylon Lock Nut
Main Support Assembly
Frame Hook - Long
Frame Hook - Short
Bail Pin
LH Wheel Cradle
RH Wheel Cradle
RH Wheel Cradle
LH Wheel Cradle
FIGURE 2
FIGURE 3
Center Tube
Receiver Shank
Side Tube
63134N Rev C 4-10-12
Printed in China