Pro Series 49904 ROUND BAR WD - Manual (Page 8)

© 2010 Cequent Performance Products
Sheet 8 of 24 49901IN 03/21/13 Rev. C
Form: F205 Rev A 5-6-05
NOTES:
Printed in CHINA
Cequent Performance Products, Inc.
47912 Halyard Dr. Suite 100
Plymouth, Mi. 48170
TEN YEAR LIMITED WARRANTY
Cequent Performance Products, Inc. warrants its Pro Series Weight Distributing systems from date of purchase against defects in material and
workmanship under normal use and service, ordinary wear and tear excepted, for 10 years of ownership to the original consumer purchaser.
Cequent Performance Products, Inc. will replace FREE OF CHARGE any part which proves defective in material or workmanship when
presented to any Cequent Performance Products, Inc. dealer, Cequent Performance Products, Inc. Warehouse or returned to factory.
TRANSPORTATION CHARGES PREPAID, at the address below. THIS WARRANTY IS LIMITED TO DEFECTIVE PARTS
REPLACEMENT ONLY. LABOR CHARGES AND/OR DAMAGE INCURRED IN INSTALLATION OR REPLACEMENT AS WELL
AS INCIDENTAL AND CONSEQUENTIAL DAMAGES CONNECTED THEREWITH ARE EXCLUDED.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply
to you.
Any damage to the Pro Series Weight Distributing system as a result of misuse, abuse, neglect, accident, improper installation, or any use
violative of instructions furnished by us, WILL VOID THE WARRANTY.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. In the event of a problem with
warranty service or performance, you may be able to go to a small claims court, or a federal district court.
Round Bar Weight Distribution With Sway Control
Installation Instructions
49901IN
Part Numbers:
49902
49901
49903
49904