beautypg.com

Billet Specialties Premium Tru Trac Serpentine System - Big Block Chrysler | HEMI User Manual

Page 15

background image

www.billetspecialties.com

Figure 10: Install Crankshaft & Water Pump Pulleys

Crankshaft Pulley: Place crank pulley on damper and align holes. Apply
anti-seize to and thread six 5/16-18 x 1” socket head cap screws with 5/16”
Belleville washers through pulley into damper and tighten firmly (26 ft/lb).

Water Pump Pulley: Place water pump pulley and nose cone on shaft. Apply
anti-seize to and attach with four 5/16-18 x 1” socket head cap screws and
tighten firmly (26 ft/lb).

15