Billet Specialties Premium Tru Trac Serpentine System - Big Block Ford - Manual (Page 12)

www.billetspecialties.com
Figure 7: Install The A/C Compressor
Apply anti seize to the compressor shoulder bolt and to two 8mm-1.25 x 25mm ARP 12pt.
cap screws.
(A) Place the A/C compressor between the timing cover and bridge bracket, thread com-
pressor shoulder bolt and washer through bottom compressor ear and into
timing cover, finger tighten.
(B) Next, thread one 8mm-1.25 x 25mm ARP 12pt. cap screw through bridge bracket and
into compressor bottom ear, finger tighten.
(C) Follow by aligning compressor top ear with bridge bracket and thread remaining
8mm-1.25 x 25mm ARP 12pt. cap screw through bridge bracket and into compressor,
finger tighten.
(C)
(B)
(A)