SENA Parani-MSP1000 - Manual (Page 49)

49
7.2.1. Adding a new user
In order to add a new user:
1. Select “Add” button.
2. Enter the username (user id)
3. Choose the user group between admin and user.
4. Select “Submit” button.
Note: Adding a new root user is not allowed.
7.2.2. Removing a user
In order to remove an existing user:
1. Check the checkbox at the front of the user to be removed.
2. Select “Remove” button.
Note: Removing the root user is not allowed.
7.2.3. Editing a user
In order to modify an existing user:
1. Select the username (user ID).
2. Modify the username, the group or the password.
3. Select “Submit” button.
7.3. Security
The Parani-MSP1000 uses SSL and TLS protocol for Web configuration (HTTPS) and network service
of the SPP. The SSL and TLS are based on the certificate, private key and the certificates of trusted
CAs. The Parani-MSP1000 provides a way to replace the certificates.