SENA Promi-MSP User Guide - Manual (Page 57)

57
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
6. AT Command Interface
Promi-MSP supports user friendly AT commands. Make sure this feature enabled in
configuration console in order to use AT commands.
Most of them are compatible with Promi-SD but some have differences in their usage and some
commands are appended for Promi-MSP exclusive use.
Supported AT commands and their differences from AT command of Promi-SD are summarized
as below. Please refer to Promi-SD userguide for more information.
Command Description Example
AT compatible with Promi-SD
ATZ 〃
AT&F 〃
ATD Connectable up to 7 devices concurrently
ATH Device to disconnect can be specified. ath000b53123456
ATO Device to communicate can be specified.
Without specified device, lately
communicated device will be selected.
ato000b53123456
CONNECT 000B53123456