Operation mode, 1 server mode – SENA Promi-MSP User Guide User Manual

Page 36

4. Operation Mode

With Promi-MSP

™ , users may configure the mode of operation to meet each application.

Total 6 kinds of different modes can be selected. By selecting the appropriate mode, users may

minimize cost and time for developing new solution.

4.1 Server Mode

In Server Mode, Promi-MSP will act as TCP server. If a Bluetooth device is connected to Promi-

MSP, corresponding TCP port for the Bluetooth device will wait for connection for as Host. The

Host may connect to the terminal via this port of Promi-MSP.

Please refer to the drawing below for your better understanding.

Server Mode

If a Bluetooth device has been registered to Promi-MSP, the Bluetooth device will communicate

with client host via the designated port at Promi-MSP.

If not registered, Promi-MSP will assign arbitrary port number to connect.

Pre-registered Bluetooth devices are distinguishable by the different port numbers at Promi-

MSP.

Bluetooth Terminals