SENA Promi-MSP User Guide - Manual (Page 51)

51
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Ex.: LKEY
00:0B:53:20:00:63|00:08:1B:00:52:72
+OK
TEMPKEY
: Some Bluetooth device doesn’t save their link key and makes new link key
on every connection. This behavior causes Promi-MSP’s flash memory to
wear out in the long period. With TEMPKEY on, Promi-MSP won’t save
link key neither and protects itself.
If you see tons of ‘Replacing hci0 link key xx:xx:xx:xx:xx:xx … ’messages
on System Log, you should turn this option on.
Ex.: TEMPKEY on
+OK
TEMPKEY
+OK on
SCAN [inquiry] [page] [noscan]
: For Promi-MSP ™ scan mode assignment. INQUIRY set to ON activates
discoverable mode. PAGE set to ON activates connectable mode.
Default SCAN displays current scan mode.
Ex.: SCAN page
+OK
SCAN
+OK page
STAT
: Displays current Bluetooth device status
If any background task running, it will show [PENDING].
Response: idx|bdaddr|tx_byte|rx_byte|err_tx|err_rx
Ex.: STAT
0|00:0B:53:20:00:63|1710|3513|0|0
+OK
AFH [channel] …
: This command will activate 802.11b Wi-Fi Combo mode, in which Promi-
MSP doesn’t make use of the ranges of frequencies where co-existing