SENA Promi-MSP User Guide User Manual

Page 28

In Repeater Mode, Promi-MSP will act as a Repeater to expand the coverage of

existing Promi-MSP. Let’s call the Promi-MSP which will act as Repeater, “Repeater”,

and call the Promi-MSP of normal operation as “Station”.

In Repeater Mode, the Bluetooth address of the Station is all you need to configure.

When Repeater is trying to connect to the Station, Status LED of Repeater is blinking.

Repeater and Bluetooth devices connected to the repeater are displayed in ‘Repeater’

tab in software.

e) Serial Hub Mode

Users may transmit/receive data via Promi-MSP in Serial Hub mode (Serial Hub).

Promi-MSP in serial hub mode relay the data from a Bluetooth device to another

Bluetooth device connected to Promi-MSP. No network host is involved.

Users may configure Promi-MSP how to handle data from Bluetooth devices in

advanced configuration of Promi-MSP software.

Note:

When using repeater, overall data throughput can be lowered.

Multi-level repeater is not allowed.