SENA Promi-MSP User Guide - Manual (Page 25)

25
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
 Default Data Port
If unregistered device tries to connect to Promi-MSP, Promi-MSP will assign the port
number consecutively from default data port number (5000).
 KeepAlive Timeout
When TCP connection is stalled unexpectedly (Ex. Power off of Host PC), Promi-MSP
will send beacons during KeepAlive Timeout (second). If there is no response during
this Timeout, TCP connection will be closed.
 Do not disconnect TCP socket
In Server Mode, each TCP connection and Bluetooth connection will be matched as
point-to-point. When new Bluetooth connection is established, new TCP connection will
be established as well.
So, when Bluetooth connection is stopped, TCP connection would be closed.
If this behavior annoys your application, users may use this option. With this option
enabled, TCP network connection remains established regardless of Bluetooth
connection.
 Register Bluetooth Device :
Shows the Bluetooth devices registered.
 Add : Add Bluetooth device to register.
 Delete : Remove Bluetooth device registered.
 Modify : Modify Port of the selected device.
b) Client Mode
In Client Mode, Promi-MSP will act as a TCP client. When a Bluetooth device connects
to Promi-MSP, Promi-MSP will try to connect to the designated Host PC. So, Host PC
should be TCP server.
In Client Mode, please select the IP address and port number of the Host PC to connect.