SENA PS400 - Manual (Page 8)

8
1.3 Product Specification
PS100 PS200 PS400
1-port
RS232/422/485
Male DB9 2-port
RS232/422/485
Male DB9 4-port
RS232/422/485
Male DB9
Serial speeds 1200bps to 115Kbps
Flow Control: None, Hardware RTS/CTS
Serial Interface
Signals:
RS232
Rx, Tx, RTS, CTS, DTR, DSR, GND
RS422 Rx+, Rx-, Tx+, Tx-
RS485 Data+, Data-
10 Base-T Ethernet with RJ45 Ethernet connector Network Interfaces
Supports static and dynamic IP address
Protocols ARP, IP/ICMP, TCP, UDP, Telnet, DNS, SMTP, DHCP client, PPPoE
User ID & Password
Data encryption: 3DES
Security
IP address filtering
Telnet or serial console port or HelloDevice Manager
System log and statistics
Error log storage up to 100 messages
Automatic email delivery of error log
Full-featured system status display
Management
Firmware upgrade via serial console or telnet
Diagnostic LED Power
Ready
10 Base-T Link, Act
Serial Rx/Tx for each serial port
Supply voltage: 7.5 ~ 30 VDC Power
Current:
140mA (nom.)@ 7.5V
150mA (max.)@ 7.5V Current:
140mA (nom.)@ 7.5V
240mA (max.)@ 7.5V Current:
190mA (nom.)@ 7.5V
260mA (max.)@ 7.5V
Environmental Operating temperature: 0 ~ 50
o
C
Storage temperature: -20 ~ 66 o C
Humidity: 90% Non-condensing
Size:
112 mm
L
82 mm W
25 mm H
(4.4 in x 3.2 in x 1.0 in)
Size:
135 mm
L
80 mm W
25 mm H
(5.3 in x 3.1 in x 1.0 in)
Size:
230 mm
L
153 mm W
30 mm H
(9 in x 6 in x 1.2 in)
Physical
properties
Weight: 290g Weight: 300g Weight: 920g
Approvals FCC(A), CE(A), MIC
Warranty 5-year limited warranty