2 pppoe setting – SENA PS400 User Manual

Page 26

3.3.2 PPPoE setting

To make the HelloDevice Pro Series work in PPPoE mode, users need to configure the PPPoE

username and password for their ADSL account.

---------------------------------------------------------------------------

IP configuration

---------------------------------------------------------------------------

Select menu
1. IP mode : PPPoE
2. Change PPPoE username : whoever
3. Change PPPoE user password : pppoepwd

Back, Refresh

-----> 2
Enter user name : pppoeuser

---------------------------------------------------------------------------

IP configuration

---------------------------------------------------------------------------

Select menu
1. IP mode : PPPoE

2. Change PPPoE username : pppoeuser
3. Change PPPoE user password : pppoepwd

Back, Refresh

-----> 3
Enter password : pppoepassword

---------------------------------------------------------------------------

IP configuration

---------------------------------------------------------------------------

Select menu
1. IP mode : PPPoE
2. Change PPPoE username : pppoeuser
3. Change PPPoE user password : pppoepassword

Back, Refresh

----->

Figure 3-8. Set up username and password for PPPoE account