SENA PS400 User Manual
Page 20
20
Welcome to PS-400 Configuration
Console#1 (Serial) : Not Connected
Console#2 (Telnet) : Available (NULL)
Console#3 (Telnet) : Available (NULL)
Console#4 (Telnet) : Established (192.168.0.16)
login : admin
Password : *****
Figure 2-10. Users’logging into the HelloDevice Pro Series (PS400)
3)
If the user logged into the HelloDevice Pro Series successfully, the same main menu screen
as the one of serial console will be displayed. The user can select the menu by typing the
menu number and then pressing [ENTER] key. In the corresponding menu screen, the user
can configure the required parameters.
4)
If serial console or the other remote consoles are connected already, the new console will be
established as read-only mode.
Figure 2-11 shows the screen display of a read-only mode
console.
Welcome to PS-400 Configuration
Console#1 (Serial) : Not Connected
Console#2 (Telnet) : Available (NULL)
Console#3 (Telnet) : Established (192.168.0.16) : Read-only
Console#4 (Telnet) : Established (192.168.0.16)
This Console(#3) is Read-Only
login : admin
Password : *****
-------------------------------------------------------------------------------
Welcome to PS-400 configuration page
Current time: 2002/05/04 14:19:47
Serial No.
: PS200-020200028
MAC Address: 00-01-95-04-13-80
F/W REV.
: V1.2.12
UP time
: 0 Days 02:32:22
IP mode
: DHCP
IP Address : 192.168.0.152
-------------------------------------------------------------------------------
Console#1 (Serial) : Not Connected
Console#2 (Telnet) : Available (NULL)
Console#3 (Telnet) : Established (192.168.0.16) : Read-only
Console#4 (Telnet) : Established (192.168.0.16)
This Console(#3) is Read-Only
-------------------------------------------------------------------------------
Select menu
1. IP Configuration
2. Serial port configuration
3. System Status & log
4. System administration
5. Advanced options
6. System tools
7. Save changes
8. Exit without reboot
9. Exit and reboot
----->
Figure 2-11. Screen display of a read-only mode console (PS400)