Ocean Optics MultiFrequency Phase Fluorometer - Manual (Page 26)

3: Configuration
Phase Fluorometer Tab for MFPF Systems in OOISensors
► Procedure
2. Click on the Phase Fluorometer tab in the Configure System screen to set the parameters for
systems using an MFPF unit. The MFPF configuration screen appears.
3. Select the first Device index (Device index 1).
4. Enter the known device serial number in the S/N box. You can find the serial number by selecting
Help | Support Info in the Tau Theta software.
5. Check the active checkbox. Depending on the MFPF’s configuration, Channel 1 and/or Channel 2
indicator LEDs will light the active channels detected. MFPF units come in single (MFPF100-1)
and dual-channel (MFPF100-2) versions. For dual-channel versions, the software can activate one
or both channels.
18 MFPF-00000-000-02-1207