Ocean Optics MultiFrequency Phase Fluorometer - Manual (Page 19)

2: Installation
Caution
Use only the power supply that came with your MFPF unit. Using a different power supply
could damage your equipment.
7. Connect the MFPF unit to your computer using the USB cable.
Note
The current version of the MFPF uses a USB connection with an emulated RS232 port. Before
starting the Tau Theta software application, you must identify the COM port number of the
emulated RS232/USB port.
MFPF Unit Rear Panel
Once you have installed both the hardware and the software, you must configure your system (see
Chapter 3:
Configuration ).
MFPF-00000-000-02-1207 11