Configuring ooisensors software for mfpf unit – Ocean Optics MultiFrequency Phase Fluorometer User Manual

Page 25

Text mode
Original mode

3: Configuration

Configuring OOISensors Software for MFPF Unit

The first time that you run OOISensors, you will be prompted to configure the software for use with your
hardware. Follow the steps below to configure OOISensors software.

► Procedure

1. Start the OOISensors software application. If this is the first time you have opened the software,

or if the software is not configured yet, the following screen appears:

2. Click

MFPF.

Note

OOISensors is configured to work with the MFPF unit. However, you can change the
OOISensors configuration to work with spectrometers using the Configure | Software menu
item.

MFPF-00000-000-02-1207