Configuring mfpf parameters – Ocean Optics MultiFrequency Phase Fluorometer User Manual

Page 23

Text mode
Original mode

3: Configuration

8. Click Done.

Note

If you need to change the COM port number, double-click on the MFPF item in the Ports (COM
& LPT) list, select the Ports Settings tab, click the Advanced button, then assign a port number
between 1 and 8).

Configuring MFPF Parameters

You must set parameters for the MFPF unit using the Tau Theta host program. OOISensors cannot
control the MFPF unit. However, OOISensors does monitor for the number of active channel changes and
reconfigures the display accordingly

► Procedure

1. Double-click on the

icon on the desktop. Note that you are asked for the MFPF unit’s the

COM port assignment. The main Tau Theta screen for the MFPF unit appears:

MFPF-00000-000-02-1207