Ocean Optics MultiFrequency Phase Fluorometer - Manual (Page 24)

3: Configuration
2. Set the MFPF parameters (located in the Instrument Controls box on the lower left of the main
screen) according to the following recommendations:
Parameter Setting
Dual Channel Unchecked for set up, checked if 2 sensors are used
Sampling Period 2 seconds for set up
Frequency kHz 5 kHz – FOSPOR
40 kHz – FOXY and HIOXY
APD voltage 110 to 155 V photon-to-electron ratio
LED Channel Depends on your experiment
Detector Channel Depends on your experiment
3. Select Advanced | Show More Control Panel from the menu bar. The following dialog box
appears:
4. Set the parameters according to the following recommendations:
Parameter Setting
Analog AGC Checked
Digital AGC Checked
LED Mode Intermittent
LED Percentage 25 -- 100%
16 MFPF-00000-000-02-1207